Product FAQs

Wingman™

How do I use the Control Panel on the FoodSaver® GameSaver® Wingman™ Vacuum Sealer?

 

How do I Make a Bag with the FoodSaver® GameSaver® Wingman™ Vacuum Sealer?

 

How do I Vacuum Seal with the FoodSaver® GameSaver® Wingman™ Vacuum Sealer?

 

How do I Use the Accessory Feature on the FoodSaver® GameSaver® Wingman™ Vacuum Sealer?

 

How do I Clean My FoodSaver® GameSaver® Wingman™ Vacuum Sealer?

 

How do I Store My FoodSaver® GameSaver® Wingman™ Vacuum Sealer?

 

Why is My FoodSaver® GameSaver® Wingman™ Not Vacuuming?

Reasons Your Machine May Not Vacuum:

  • Check for wrinkles in bag along Sealing Strip. To prevent wrinkles in the seal, gently stretch bag flat while inserting bag into Vacuum Channel.
  • Open unit and make sure Gaskets are inserted properly and there are no foreign objects, dirt or debris on the Upper or Lower Gasket
  • Latch has been left in OPERATE position: Gaskets may be compressed.Unlatch and allow 10 to 20 minutes for Gaskets to expand.
  • Make sure the accessory hose is not attached to accessory port.
  • Make sure the lid is latched down all the way. If the Latch does not catch the lid and bring it down, there will be a leak between the Gaskets.

Why is the Red Seal Light Flashing on My FoodSaver® GameSaver® Wingman™ Vacuum Sealer?

Reasons the Red Seal Light May Flash:

  • Unit is overheated. Always allow 20 seconds between seals. Under heavy usage, appliance will shut off automatically and Red Light will flash. Wait for 20 min. for unit to cool off.
  • Always wait 20 seconds between seals.
  • Latch has been left in OPERATE position: Gaskets may be compressed.Unlatch and allow 10 to 20 minutes for Gaskets to expand.
  • Vacuum pump running more than 120 seconds. Under heavy usage, appliance will shut off automatically and Red Light will flash.